Balancing machine BVI-03-10T
  • Description
  • Features
  • Specifications
  • Standard scope of supply

Dynamic balancing machine BVI-03-10T is designed for determining dynamic unbalance parameters of the turbine type rotors with weight up to 3.0 kg, allowing the drive to rotate with a flat endless belt.

Determination of unbalance parameters is carried out when the rotor rotates on its own journals in the prismatic liners installed on the stand supports.

TURBOCHARGER ROTOR BALANCING IS PERFORMED IN TWO STEPS::

1. Two-plane shaft balancing without compressor wheel

(I-first correction plane, II-second correction plane).

Станки балансировочные универсальные дорезонансные

2. Two-plane balancing of the compressor wheel assembly with shaft

(I-first correction plane, II-second correction plane).

Станки балансировочные универсальные дорезонансные
MACHINE ADVANTAGES:

High measurement accuracy - specific residual unbalance no more than 0.4 gmm/kg

Frequency converter with vector control allows a smooth rotation frequency control of the balanced part.

Design of the machine allows to eliminate the unbalance without removing the part from the machine

Parameters BVI-03-10T
Maximum rotor weight, kg 3
Maximum rotor diameter, mm 400
Distance between the centers of rotor supports, mm 10-200
Maximum rotor journal diameter, mm 5-200
Rotor rotation speed range, rpm 600-5000
Minimal achievable residual specific unbalance, gmm/kg 0,4
Machine dimensions 420х400х480
Machine weigt, kg 20
Measuring system PB-02M

machine BVI-03-10T with balancing device PB-02M

drive belts set

standard set of adapters for installation of three turbine types including turbines with bottom oil supply

additional set of adapters for installation of 20 turbine types - to be ordered separately