Pre-balancing machines for turbocharger core assemblies
The table shows just the list of specifications of basic machines.
Almost every parameter of the machine concerning balancing rotor (like diameter, length, mass etc.) may be changed by the customer’s order.
|1. Turbocharger maximum weight, kg||15|
|2. Turbocharger maximum diameter, mm||280|
|3. Distance between turbocharger rotor wheels centers, mm||50-230|
|4. Maximum achievable rotor rotation speed, rpm||20000|
|5. Minimum achievable residual specific unbalance , gmm/kg||0,4|
|6. Nominal operating lubrication system pressure, MPa||5|
|7. Required pneumatic system pressure, kg/cm2||6|
|8. Overall dimensions, mm||795х490х1285|
|9. Machine weight, kg||68|
|10. Balancing system||PAK-1|
|PB-02M with graphic indicator|
The machine main advantages are:
1. A possibility to check oil leakage after turbocharger repair.
2. A possibility to found and eliminate technologic unbalance after turbocharger assembling.
3. This machine is equipped with digital measuring systemPB-02M with graphic indicator.
4. A pneumatic system requirement is only 0.6 MPa.
You might also like:
Vneshtorg-Micron ltd. © 1999-2015