Semi-automatic balancing machine 97B300
Vertical semi-automatic machine for balancing railway wheel brake disks
Special balancing machine with vertical axis of rotation, with PAK balancing system. The machine is designed for balancing disc type rotors weighing up to 300 kg and with a maximum outer diameter of up to 1300 mm. The machine is equipped with a drilling module for unbalance correction.
Unbalance correction is carried out directly on the machine with a drilling module
The rigid support structure allows balancing the rotor with large initial unbalances. Interchangeable balancing equipment allows you to quickly re-equip the machine for parts with different mounting holes.
Jacks for smooth installation and removal of the part on the faceplate provide protection of the machine mechanisms from impacts, create convenience and safety in the process of work. Protective guard of the class B rotor - protects against contact with rotating parts. The presence of the function of automatic turning, as well as the mechanism for fixing the spindle in the place of imbalance elimination, allows you to bring the disk to the place of imbalance elimination (drilling, milling) quickly and accurately.
Asynchronous frequency-controlled electric drive allows you to perform stepless speed control without stopping the electric motor, the choice of optimal modes for balancing, as well as perform the rotation of the rotor.
| Options | 97B300 |
|---|---|
| The largest mass of balanced rotors, kg | 300 |
| Maximum part diameter, mm: | 1500 |
| Maximum part height, mm: | 150 |
| Minimum achievable residual specific imbalance, g.mm/kg | 0,4 |
| Number of measured rotor correction planes | 1 and 2 |
| Rotor speed range during balancing, rpm | 200 - 1000 |
| Power of the electric motor of the rotation drive of the part, kW | 5,5 |
| Balancing system | PAK |
To ensure safe working conditions, the machine is equipped with:
- protective brackets with pneumatic drive - to prevent the shaft and its elements from flying out in the event of the destruction of hinges or splines.
- sectional protective guard of the cardan shaft, to protect against possible ejection, when the shaft rotates, poorly fixed corrective weights, grease from bearings, etc.
The machine is equipped with:
- sectional protective guard of the cardan shaft, to protect against possible ejection, when the shaft rotates, poorly fixed corrective weights, grease from bearings, etc.
The guard is equipped with a lock to turn on the spindle rotation when the guard is not in the closed position.
Semi-automatic machine for balancing brake railway discs model 97B300
We will correctly calculate the allowable residual imbalance tolerances according to your drawings. Balance right!
Leave a request, our manager will contact you to clarify the details for preparing a commercial offer
FOR FREE
We will correctly calculate the allowable residual imbalance tolerances according to your drawings. Balance right!
