Mechanical screw press PRK-2

For pressing and stippling of cardan shafts crosses

It is intended for assembly works and crossbow stippling operations during the repair and production of cardan shafts, as well as for other processes in which there is a pressing operation.

Design Features A punch is installed and fixed in the housing corresponding to the diameter of the fork bearing. The fork with cross is installed so that axis of the fork hole (and cross) coincides with axis of punch. Lower stop is installed to support the cross-piece. Press head wheel is pressed clockwise. Using the press, it is possible to process cardan shafts and other products with parameters different from those presented above, if this does not prevent comfortable work. The press is designed to work in repair shops, does not require special knowledge for operation and maintenance

Parameters	PRK-2
Sizes of the working area (L x B x H), mm	322х312х350
Maximum compression force developed by the vertical press head, kg.	5500
Maximum force developed by vertical head of press on rupture, kg.	2000
Overall dimensions of the equipment, mm (L x B x H)	402х488х1478
Machine weight, kg	160

Technology tooling for replacing stacked u-joints

Centring housing for the punches.
Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts.
Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts.