BALANCING MACHINE BVI-03-10T

Machine for balancing turbocharger rotors (compressor shaft and wheel) of cars and trucks, agricultural and other special equipment

4
Maximal weight, kg
400
Maximal diameter, mm
300
Rotor length, mm
0,4
Accuracy, g.mm/kg
Machine for balancing the rotors of turbochargers whose mass does not exceed 4 kg. The main advantage of this machine is its unbalance detection accuracy and high productivity. The high sensitivity of the machine allows you to work with unbalances of very small magnitudes. Due to its simplicity and reliability, the equipment can use in single or small-scale production. The machine is viral at specialized car services engaged in repairing turbochargers.

WE OFFER A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE

Our company has a technical support service center. If you have any questions, you can contact us for help.
Commercial offer for the equipment

Leave your request and our manager will get in touch with you to detail the commercial offer preparation.






    APPLICATION

    Turbocharger rotor balancing is performed in two stages:

    1. Two-plane shaft balancing without compressor wheel (I-first correction plane, II-second correction plane).
    2. Two-plane balancing of the compressor wheel assembled with the shaft (I-first correction plane, II-second correction plane).
     

    FEATURES

    The equipment has high accuracy in determining the imbalance of 0.4gmm/kg = 0.4µm.

    All this is achieved through:
    • The use of special prisms with slips made of antifriction material, which has a high coefficient of friction, which prevents their wear and have a small hardness, allows you to save the contact surface of the rotor.
    • The support structure allows the installation of the rotor without hindrance.
    • The supports are adjustable in height, making it possible to balance the rotor with different diameters of the bearing journals.
    • The supports can be easily set relative to the guides due to their small mass.
    • The design of the machine allows you to install even rotors in which the bearing journals are located close to each other. The only limitation is the width of the drive belt; this increases the functionality of the machine.
    • Soft supports make the machine very sensitive and allow you to analyze the residual level of unbalancing "by touch".
    • Adjusting the tension of the "drive belt" allows you to select the required amount of pressure to reduce the balancing error.
    • The belt tension mechanism allows you to install or remove the rotor from the machine quickly, reducing the machine's setup time.

    BALANCING SYSTEM AND CONTROL

    We make balancing easier - the main advantage that characterizes our balancing systems.
    • Ease of use and ease of operation does not require the operator's special theoretical knowledge.
    • Displays the balancing process in real-time and monitors the unbalance behaviour of the rotor on the screen to achieve the best result.
    • The maximum sensitivity of the machine at any time of operation, adjustment to the rotor and calibration of the machine is carried out by the operator himself.
    • It is free from the influence of external vibration factors on the measurement result and has a high level of noise immunity of all elements.
    • World-leading functionality and accuracy thanks to 40 years of experience in development and application in various industries.
    BALANCING MACHINE BVI-03-10T
    Balancing system PB-02M

    Complete functional for balancing problem solving. Very reliable, unpretentious to the heavy working conditions system with LCD display and membrance keyboard.

    SPECIFICATIONS

    Parameters BVI-03-10T
    Maximum weight of the balanced rotor, kg 4
    Maximum diameter of the balanced rotor, mm 400
    РDistance between the centres of the rotor supports, mm 10-200
    The largest diameter of the rotor pins, mm 5-200
    Balanced rotor speed, rpm 600-3000
    Minimum achievable residual specific imbalance, gmm/ 0,4
    Machine dimensions, mm 420х400х480
    Machine weight, kg 20
    Measuring system PB-02M

    PURCHASE SUPPORT AND TRAINING

    Our company has the service center for technical support in case of any questions you can contact us for help.

    Balancing technology
    We help you create and master the balancing technology for your parts
    Personnel training
    We train personnel how to operate the machine
    Warranty
    We provide warranty for all our equipment
    Request a quote for equipment
    Our manager will contact you to find a customized solution.
    Submit a request

    LEARN MORE ABOUT OTHER MACHINES IN THE SERIES

    CHRA TURBO BALANCING MACHINE MODEL DBST-10
    CHRA TURBO BALANCING MACHINE MODEL DBST-10
    Low-speed balancing of the turbocharger rotor in its own housing after assembly
    VSR BALANCING MACHINE MODEL SBR-10
    VSR BALANCING MACHINE MODEL SBR-10
    High-speed finishing balancing of the turbocharger rotor in its own housing at operating speeds
    VSR BALANCING MACHINE MODEL SBR-10
    THE STAND FOR ADJUSTING VARIABLE GEOMETRIES "GEOMET-2000"
    Static calibration of the turbocharger variable geometry mechanism after repairs
    Tester of electronic actuators ATP-1000
    Tester of electronic actuators ATP-1000
    Check DC motors, supercharger solenoid, position sensors
    The page lists the characteristics of the basic model of the machine. Almost any parameter(diameter, length, weight, etc.) of the bench can be changed on the customer's request. When ordering the machine, all parameters of the machine will be agreed additionally.