MACHINE FOR BALANCING 9D716S1
The machine is designed for balancing the rotors of electric motors weighing up to 500 kg.
- current angle tracking system
- automatic positioning of the part to be balanced to the required angle
- the ability to select the optimal modes for balancing.
| Main technical data and characteristics | 9D716S1 |
|---|---|
| Mass range of balanced rotors, kg | 5 – 300 |
| The greatest load on one support, kg | 170 |
| Minimum achievable residual specific imbalance, g•mm/kg | 0,4 |
| The smallest correction unit, g•mm/kg | 0,2 |
| Rotor speed range during balancing, rpm | 200-1200 |
| Maximum diameter of the rotor over the bed, mm | 1300 |
| Maximum rotor diameter over belt drive, mm | 500 |
| Diameter of bearing necks of the rotor, mm | 20-180 |
| Distance between the centers of the supporting necks of the rotor, mm | 200 – 1350 |
| Overall dimensions of the machine, mm (length x width x height) | 1600х1352х 1148 |
| Machine weight, kg | 505 |
| Sound level at the workplace, dBA, no more | 350х600х1266 |
| Overall dimensions of the electrical cabinet, mm (length x width x height) | 72 |
| Corrected sound power level, dBA, no more | 80 |
| Additional information about the machine | 9D716S1 |
|---|---|
| Machine type | pre-resonant |
| Machine drive type | Belt, lower |
| Support type | Rollers + Prisms |
| Installed trouble-free operating time, hour, not less | 1500 |
| The established service life up to the first major repair, years, not less | 10 |
| Type of supply current | TN-C ~ 3- phase |
| Current frequency, Hz | 50±1 |
| Mains voltage, V | ~380 ±10% |
| Voltage: - machine drive circuits, V - control circuits, V | ~ 380 - 24, DC (direct current) |
| Number of electric motors | 1 |
| Power of the electric motor of the rotation drive of the part, kW | 4,0 |
| Technical characteristics of the balancing system | 9D716S1 |
|---|---|
| Machine balancing system | Tracking system PAK-1 with the function of the rotor turning |
| Rotor speed control | Real time on screen |
| Display of unbalance values | Real time on screen |
| Measurement display | Real time on screen |
| Display of the current angular position | Real time on screen |
| Measurement time, sec | 20 – 25 |
| Rev counter | laser |
| Rotor angle sensor | Included |
| Additional rotation (positioning) of the rotor | Automatic and manual, with display of the current angle on the screen |
| Number of measured rotor correction planes | 2 |
| Measurement in each plane | simultaneously |
| Coordinate measurement system | polar |
| Operating frequency range during balancing, Hz | 0-50 |
| Input resistance, kOhm, not less than | 100 |
| Indication: unbalance module, unbalance angle and speed | LCD display |
| Power supply of the device with AC voltage, V | ~220 ±10% |
| Power consumption, W, no more | 10 |
Balancing machine 9D716S1
Commercial offer for the equipment
Leave your request and our manager will get in touch with you to detail the commercial offer preparation.
FOR FREE
We will correctly calculate the allowable residual imbalance tolerances according to your drawings. Balance right!
