The bench for disassembly of cardan shafts P2515K

Hydraulic bench for disassembly of hinges of any size

The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
The bench for disassembly of cardan shafts P2515K
Cardan shaft disassembly press is designed for quick and efficient disassembly of hinges and replacement of crosses in cardan shaft connections.
The presence of a large set of tools and devices allows you to disassemble almost all existing varieties of cardan shaft connections. The time of disassembly of the hinge even on the cardan of freight transport can take no more than 3-5 minutes.   With the help of the upper clamp, carefully press on the eyes of the shaft fork until the bearing sleeve begins to exit from below, and enters the hole formed by the clamps-inserts and the lower pusher. We continue to exert pressure until the cross comes close to the flange fork. Clamp the bearing sleeve using proper force. With the help of the lower pusher, push out the fork, removing the sleeve of the bearing from it.   The press is designed to use in repair shops, does not require special knowledge for operation and maintenance.
Main technical characteristics of the bench
Maximum upper pressure cylinder force, kg 30 000
Maximum lower cylinder force, kg 12 000
Adjustable force on the cross clamp cylinder, kg 1000 – 20 000
Maximum stroke of upper cylinder, mm 300
Displacement of cardan shaft holder Hydraulic
Speed of upper pressing device movement, m/min 0,55
Hydraulic system operating pressure, MPa 150
Tank capacity of oil station, l 40
Supply network parameters ~ 380 V ± 10%, 3 Ph, 50 Hz ± 1 Control circuits ~ 24 V
Control circuits ~24 V
Controls Buttons and levers of hydraulic distributor
Power of driven asynchronous motor of oil station, kW 3,0
Weight, kg 1800
Overall dimensions (L x B x H), mm 2150 х 1100 х 2160
The bench for disassembly of cardan shafts P2515K
Basic Delivery Kit for Bench
The bench for disassembly of cardan shafts of the model P2515K assembled 1 pc. <b>1 pc.</b>
<b>Upper fork:</b> <b>Lower sponges:</b>
Fork 27 1 pc. Side sponges 38 2 pcs
Fork 42 1 pc. Side sponges 39,7 2 pcs
Fork 48 1 pc. Side sponges 42 2 pcs
Fork 52-53 1 pc. Side sponges 44 2 pcs
Fork 57 1 pc. Side sponges 45 2 pcs
Fork 65-72 1 pc. Side sponges 47 2 pcs
Side sponges 48 2 pcs
<b>Lower fork:</b> Side sponges 50 2 pcs
Fork 27-30 1 pc. Side sponges 52 2 pcs
Fork 35-38 1 pc. Side sponges 53 2 pcs
Fork 42 1 pc. Side sponges 57 2 pcs
Fork 44-45 1 pc. Side sponges 59 2 pcs
Fork 47-48-50 1 pc. Side sponges 65 2 pcs
Fork 52-53 1 pc. Side sponges 68 2 pcs
Fork 57-59 1 pc. Side sponges 72 2 pcs
Fork 65-68 1 pc.
Fork 72 1 pc.
Bench Operation manual (in Russian) 1 pc.

Simple hinge disassembly principle

 
  • The time of disassembly of the hinge even on the cargo truck can take no more than 3 - 5 minutes.
  • With the help of the upper clamp, gently press on the eyes of the shaft fork until the bearing sleeve begins to exit from below, and enters the hole formed by the clamps-inserts and the lower pusher.
  • Continue pressing until the cross comes close to the flange plug.
  • Clamp the bearing sleeve using proper force. With the help of the lower pusher, push out the fork, removing the sleeve of the bearing from it.
  • The press is designed for usage in repair shops, does not require special knowledge for operation and maintenance.

WE OFFER A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE

Our company has a technical support service center. If you have any questions, you can contact us for help.
Commercial offer for the equipment

Leave your request and our manager will get in touch with you to detail the commercial offer preparation.